Aldebaran, the Fiery Orange-Red Eye of a Starry Bull

Aldebaran, the Fiery Orange-Red Eye of a Starry Bull Behind every star in the sky is a fascinating origin tale. Just as the Sun does, they shine by burning fuel in their cores and giving off light. And, like the Sun, many have their planets. All were born in a cloud of gas and dust millions or billions of years ago. And, eventually, all stars grow old and evolve. Thats whats happening to Aldebaran, a star that is practically a neighbor to our own star, the Sun, at 65 light-years distance. Youve probably seen Aldebaran in the constellation Taurus (which is visible to us at night from about October through March each year). Its the reddish-orange star at the top of the V-shaped face of the Bull. Observers in ancient times saw it as many things. The name Aldebaran is from the Arabic word for follower, and it does seem to follow along as the Pleiades star cluster rises higher in the sky late in the year. For the Greeks and Romans it was the eye or the heart of the bull. In India, it represented an astronomical house, and portrayed it a deitys daughter. Others around the world have associated it with the season to come, or even as an aid to the Pleiades (who, in some cultures, were seven women in the sky).   Observing Aldebaran The star itself is fairly easy to spot, particularly beginning in the evening skies of October each year. It also presents a remarkable  experience for skygazers patient enough to wait for it: an occultation. Aldebaran lies close to the ecliptic, which is the imaginary line along which the planets and Moon appear to move as seen from Earth. Occasionally, the Moon will slide between Earth and Aldebaran, essentially occulting it. The event is visible from northern hemisphere locations in the early autumn. Observers with a keen interest in watching it happen  through a telescope can see a detailed   view of the lunar surface  as the star slips slowly behind the Moon and then reappear a short time later. Why Is it in a Vee of Stars? Aldebaran looks like its part of a cluster of stars called the Hyades. This is a V-shaped moving association of stars that lies much farther away from us than Aldebaran does, at a distance of about 153 light-years. Aldebaran happens to lie in the line of sight between Earth and the cluster, so it appears to be part of the cluster. The Hyades themselves are fairly young stars, about 600 million years old. Theyre moving together through the galaxy and in a billion years or so, the stars will have evolved and grown older and scattered apart from each other. Aldebaran will have moved from its position, too, so future observers will no longer see an angry red eye at the top of a vee-shaped swarm of stars. What is Aldebarans Status? Technically speaking Aldebaran is a star that has stopped fusing hydrogen in its core (all stars do this at some point in their lives)  and is now fusing it in a shell of plasma surrounding the core. The core itself is made of helium and collapsed in on itself, sending the temperature and pressure soaring. That heats up the outer layers, causing them to swell. Aldebaran has puffed out so much that its now nearly 45 times the size of the Sun, and is now a red giant. It varies slightly in its brightness, and is slowly blowing its mass out to space. Aldebarans Future In the very distant future, Aldebaran may experience something called a helium flash in its future. This will happen if the core (which is made of helium atoms) gets so densely packed that helium starts trying to fuse to make carbon. The temperature of the core has to be at least 100,000,000 degrees before this will happen, and when it gets that hot, almost all the helium will fuse at once, in a flash. After that, Aldebaran will start to cool and shrink, losing its red giant status. The outer layers of the atmosphere will puff away, forming a glowing cloud of gas that astronomers refer to as a planetary nebula. This wont happen any time soon, but when it does, Aldebaran will, for a short time, glow even more brightly than it does now. Then, it will dim down, and fade slowly away.

The Educational Value of Play as Work and Work as Play The WritePass Journal

The Educational Value of Play as Work and Work as Play Introduction The Educational Value of Play as Work and Work as Play , nicurriculum.org.uk/docs/foundation_stage/learning_through_play_ey.pdf Montessori, M. 1978. The Secret of Childhood. Orient Longman, Hyderabad Schools Kill Creativity, last accessed 8th December 2014, ted.com/talks/ken_robinson_says_schools_kill_creativity/transcript?language=en#t-993000 Whitbread, D. The Importance of Play, last accessed 7th December 2014, importanceofplay.eu/IMG/pdf/dr_david_whitebread_-_the_importance_of_play.pdf

Network Security Essay Example | Topics and Well Written Essays - 750 words

Network Security - Essay Example Cyber security made the greatest move on the discovery of Stuxnet, computer software, which is believed to be the first warfare weapon and a computer virus that attacks and destroys industrial computer programs. Over the past years there has been a great debate about the Stuxnet virus. This computer worm was first used to wipe sixty percent of Iran’s computer network and programs. The Stuxnet attack has far-reaching policy implications and cyber-security, since it demonstrates that states are vulnerable to crippling cyber actions from other states. The source and the exact purpose of the virus are not well known to the international community. The software was basically designed to target industrial equipment. It is an IT discovery which attacks programs and destroys information aimed for an attack. Since the discovery of the software, different opinions regarding its application have been forwarded by many computer experts among other members of the public. Views against the device have been raised while other individuals considered it a security device that can be used to improve security in a nation (Reveron, 2012). An observation on this device portray that there is a difference in the style of coding used in the software that initially affected the targeted states and the software that deploys once the virus has penetrated the state’s defenses. The device has therefore been believed to have been a collaborative effort between its two developers, the United States and Israel. According to other experts in various defense departments, the highly complex computer software was the first of its kind. It is said to have been written to specifically target critical mission control systems that run a specific combination of software and hardware. Many experts believe that the kind of research coordinating and planning required to undertake this specific kind of multi-stage attack on an industrial control system is most likely

Westover electrical Case Study Example | Topics and Well Written Essays - 750 words

Westover electrical - Case Study Example These rejected products are usually found in the course of the manufacturing process. The company had not identified the primary cause of the problem. Robert Gagnon found that for the duration of two months, costs sustained as a result of these rejected products have risen. This report by Robert Gagnon has prompted the company to take quick actions to solve this problem. Robert Gagnon’s report outlines problems facing the company,Possible solutions to the problems,Recommendations received from the investigation done. The investigation was done through the identification of the problem by reviewing the supply chain. The supply chain starts from the production process (winding department) to the packaging department. The Pareto analysis chart provides a systematic flow of the results. It is simple to understand. To use of this mechanism, we are able to easily view that abraded wire is a Winder 3 problem. Therefore, in view of this, winder 3 that should be replaced so as to reduc e the high number of rejected abraded wires. Broken Lord has a Winder 1 problem. For this, it is important that Winder 1 be replaced so as to reduce the number of rejects. Graphs can be used as well. The plotting p chart could be done when an assumption is made that for any defect that results in production of a defective unit, there is only one defect per each inspected unit. A c chart could be used to plot the quantity of defective units per sample. Each will be separate graphs. Use of tables causes much confusion. It is difficult to understand the results without explanation. These modes of presentations are both easy to understand and they also present a neat exhibit of data. 3. Gagnon’s recommendation Robert Gagnon recommended that Westover Electrical Inc. focus on finding the cause for abraded wire and the failed electrical test on the Winder 3. It may be possible that there exists a conflict between abraded wire and the electrical test. This conflict causes the two to overpower winder 3. Problems of the winder cause problems with the output. By fixing this, 53% of the total Winder rejects could be eliminated together with 88% of all Winder 3 rejects. This is a surprising reduction in total costs incurred by Westover Electrical Inc. Further, Gagnon stated that it is important to pay much attention to the source for broken leads on Winder 1. This problem could be caused by the fact that Winder 1 may be of low quality in dealing with broken leads. It may not be strong enough or fully equipped to handle these broken leads. By eliminating this problem, 80% of Winder 1 total rejected product together with 24% of all total rejects will be eliminated. Moreover, Robert Gagnon stressed that it was vital to find the cause for wrong core and wrong wire failure early within the month on Winder 2. The assumption made was that it might have been one of their new personnel who failed to handle the equipment properly. The new personnel may have placed a higher number of wires on the winder than its capacity could support. The mistakes made were reflected in the number of rejected units produced. In time, the new employee gained experience thus a decrease in the number of rejected units was observed. 4. Prepare the detail necessary to supplement Gagnon’

English skills Essay Example | Topics and Well Written Essays - 500 words - 1

English skills - Essay Example â€Å"Quality in Higher Education â€Å" have a high impact factor. Nevertheless, since it was a qualitative research, there always exists likelihood of slightly inaccurate interpretation of responses of the research participants. This article is primarily about internationalization. While the writers have objectively declared how they understand internationalization i.e. a process that requires sustained effort causing intensification of the relationships among different cultures, yet this definition remains a personal opinion since the writers have not cited a reference for it. Contrary to that, most ideas in the text are supported with evidence. Examples of such ideas include globalization and cultural intelligence. The article was written in the year 2009. It can be considered recent since it was written only about four years ago. The content of the text is very relevant and up-to-date with the contemporary thinking. Most organizations today tend to give international exposure to their employees by making them expatriates. Cultural intelligence and international experience are two of the most appreciated qualities about the candidates for any kind of job today. The writers have fairly complied with all the rules, guidelines and expectations concerning the language, style, structure, referencing and vocabulary that those producing material at University level are expected to follow. The text has a flow of ideas with smooth transition from one to another. The ideas are arranged in the form of points. Sections and headings help the reader understand what a paragraph entails and keep track of the

Dynamics Of Loudspeakers English Language Essay

Dynamics Of Loudspeakers English Language Essay The loudspeaker speakers are mostly designed for commercial purposes and the manufacturers care less about the quality of the sound production. Countless designs are available in the market and the customers counter a great difficulty to choose the right type of loudspeakers. Usually, the loudspeaker speakers are picked up due to their style, size, amount of bass and the variety of frequencies they produce. The speakers have wide range of designs and their corresponding prices. The competitors are working hard to introduce newer designs and better technology with innovative inventions and affordable prices. Nevertheless, the box loudspeaker speakers are the standard devices upon which minor modifications are based upon every new model. These devices also help in tackling box radiation and non uniform power response. Basic purpose of the loudspeaker speakers is to create the auditory signals and the sound waves. This function is performed by the microphones to the hi-tech loudspeaker speakers. Nevertheless, it is very important to establish a balance between on axis frequency response and the waveform fidelity. And they can be attained for a sole listening point. Otherwise, the distortion can easily destroy the sound quality. Moreover, the off axis frequency response should also be the design goal, although, it is often neglected. All these measures help in the creation of natural timbre and any imbalance may cause the distortion due to the disharmonious effect of high and low frequencies. Similarly, there are line source speakers to avoid nonlinear distortions meaning the distortions or the sounds not originally present in the frequencies. The constant directivity speakers and the non directivity speakers and omni-directional speakers are other options that interact with the surrounding and may solve the issues involved in box sound radiation. Here the dipole radiator may also help to handle the lowest frequency sounds. However, all these factors are highly influenced by the range and the placement of the sound emitting systems. The cross over speakers include the tweeter and the woofer in almost countless combinations. Likewise, the wireless speaker is another variation. All these need power sources and batteries and amplifiers as the airwaves help transfer the incoming signals. Multiple speakers of various ranges of sounds also have numerous advantages. Since, they have the capacity to reproduce voices, music and sounds. The transducers or the drivers may be used in more numbers to manage sound pressure or attain maximum accuracy and to produce a variety of frequency ranges. There are also subwoofers, woofers, mid range speakers, and tweeters which are especially designed and optimized for very high sound frequencies. It is to be kept in mind that all these devices are manufactured in numerous designs according to specific applications. Henceforth, there are various types and combinations of speakers and numerous ways to tackle distortions. To conclude, these models and the sound systems are available in the market under different banners and brands. Developmental phases of loudspeakers The journey of the development of the loudspeaker speakers begin with landmark invention of Graham Bell, when he installed the very first electric loudspeaker in his telephone in 1876. This was followed by J. P. Reis who did likewise in 1861 that could produce pure tones and speech sound also. In this regard, Ernst Siemens and Nikola Tesla also contributed with their valuable services. In the early phase, compressed air and metal horns were used to amplify sounds. Since then the models have undergone innumerable modifications in sizes, shapes and applications. Oliver Lodge was the one who introduced moving coil or the dynamic driver loudspeaker speakers. However, Peter Jensen and Edwin Pridham applied moving coil loudspeaker in practice. Nevertheless, their product could not be sold to the commercial companies and they assumed the public name for their product called Magnavox. In 1924, the moving coil as found in direct radiators was patented. They adjusted the mechanical parameters to the resonance and low frequency. The early loudspeaker speakers utilized the electromagnets as the larger magnets were quite expensive. The current passage used to energize the electromagnets coil when the pair of connections was attached to the driver. Thus, they served the dual purpose of filtering the power supply and improving the functioning of loudspeaker speakers. In 1930s, the focus was shifted to improve the frequency response and the pressure of sound. The Shearer Horn system was introduced in the theaters which had a single multi cellular horn having 15 low frequency drivers. Nonetheless, there have been several improvements in the mechanism and the functions of loudspeaker speakers. Efforts have been made to improve the loudspeakers efficiency. It can be explained as the output of the sound power as compared to the input of the electrical input. Typically, one percent of the electrical energy is transformed into the acoustic energy and it also happens that this percentage is not very high. The rest of the energy is converted to heat energy. And this is the hurdle for which speakers closure designs are used. This system helps to attain a normal balance between acoustic impedance and the heat radiation. The efficiency is also related to the loudspeakers frequency management. If we take the example of the frequency input, if it decreases the output of the woofer driver will also decrease. However, the sensitivity and the efficiency of the loudspeaker are highly dependent upon the environment. There are complex factors which are at times beyond the manufacturers control. If the environment is reflective, then all the factors meaning the size, shape, volume and furnishings have their effects upon the speakers and their performance. It is also inferred that the sounds reaching the ears of the listeners are a combination of the actual sounds and the reflected sounds also. Thus the mechanism and the complexities of the speaker system always have a vast horizon to be explored. The fruitfulness of loudspeaker speakers In recent years, there has been a vigorous research that is conducted on the radiation of the sound sources. The point source is the typical radiation source for the loudspeaker speakers. It is usually a small point that may increase or decrease in size while emitting sound waves. Almost all of the objects, including the loudspeaker speakers, have such combinations of simple point sources. Nevertheless, the radiation pattern of the single point source and the combination of point sources is different. The distance and the orientation between the sources largely influence these patterns. Similarly, a planer source radiates sounds for low frequencies at uniform level. Also, the smaller the diver, the higher would be the frequency output. Mostly, the electrostatic and the planar magnetic designs of the loudspeaker speakers are based on these patterns of behavior. In this regard, the directivity is a significant matter that establishes a balance between the sound that is heard and the interacting sounds in the surroundings. The loudspeaker speakers which are perpendicular to their face cause the reverberation lacking in higher frequency which appears to be deficient in treble although, measuring sounder on the axis level. The extremely directive speakers at higher frequency appear to be giving too much of the treble. These are some of the intricacies of the loudspeaker speakers. Coming to the uses of the loudspeakers, it can be safely said that they are used almost in every setting nowadays. Foremost utility is with the computers where innumerable tasks accomplished need be acoustically heard and verified. In business and education fields, the loudspeakers play a vital role where lessons, lectures, seminars and conferences can be heard with the help of loudspeakers. There is another advantage that lies in the convenient use of the loudspeakers. They are easy to handle and deal with. There can be easily attached to the devices like computer, television and the CD players etc. They support the listening without even looking at the screen of the computer and there is absolutely no need to read the written content. But two things should be kept in mind. There should be a proper place to keep the speakers. As compared to the microphones or the headphones, these loudspeakers take much space to be placed. Secondly, they offer greater facilitation in listening when there is nobody around or where there is complete privacy. The loudness of sound can be noisome for people and they may feel distracted in the course of their busy routine. However, the volume of the sound is adjustable which can be increased or decreased according to the need, settings and the environment. One of the other benefits is the availability of the sound system at the nearest doorstep. The prices may vary from low to high range so the customers have ample of options to choose from. They are available in a variety of sizes that can be selected from, according to the physical settings of the location. Thus, the great invention of the loudspeaker speakers has become a part of our everyday life and routine without which the daily activities remain incomplete. QUALITY ISSUES OF THE LOUDSPEAKERS Among the multifarious kinds and aspects related to the loudspeaker speakers, the electrostatics loudspeakers maintain a special position. They are the type where sounds are produced by the pressure exerted on the membrane present in the electrostatic field. The loudspeakers use a thin plastic sheet coated by the conductive material usually known as diaphragm. There has to be a stable and constant charge on the surface of the diaphragm instead of the continuous voltage. This is achieved by carefully placing a large value resistor and the selection of the conductive material. Mostly, two grids drive the diaphragm placed at both the sides in electrostatic loudspeaker speakers. The use of one grid results in the harmonic distortions and therefore, the two grids reduce the voltage dependent part of non linearity and enhances the efficiency of the charge dependent parts. In this way the problem of harmonic distortion is resolved. The significant role is played by the grids to induce the field strength. And in the same course it has to smoothen the flow of sound. For this purpose, the high voltage of the audio or sound signal is required. This is the type of loudspeaker speakers are high impedance instruments. In sharp contrast to the above mentioned device, the electro dynamic cone loudspeakers are low impedance forms. The merits of the speakers and particularly electrostatic speakers are numerous. They control the level of distortion and reduce it to the minimum magnitude and also they utilize the diaphragm of the lightest weight. They have the sophisticated frequency response and the better generation of the sounds. These types of loudspeaker speakers store less heat energy to be released later and improve the musical transparency. Such speakers have a range of designs to offer. They do not have the typical cross over filters. So they have a lesser tendency to transform the quality of the sounds and even distort the sound. There may arise the problem of low loud bass, that can be tackled through the hybrid or the dynamic speakers. The subwoofer is a solution to remedy low frequency issues, however, the electrostatic diaphragm can easily handle the higher frequencies. As a matter of fact, these loudspeakers have to be protected from the dust, moisture, insects, water, heat and other particles. These must be handled carefully as the current or any short circuit issue can be fatal. So the human beings and animals must avoid any physical contact to the high voltage parts of the sound system. Any excess of the harmful elements may also impair the functioning of the loud speakers. The current excess is also critical for the device. In case of such unpleasant events, repairs and the services have to be availed in order to restore the normal or qualitative functioning of the device. Loudspeaker and the placement issues The loudspeaker speakers refer to the drivers individually or the combination or many transducers. These are the devices that help to generate the sounds by converting the audio signals or the sound waves thus presenting in the form that the human ear can detect those frequencies in an audible form. These are the tools by which human beings can receive the message enclosed in the audio tapes or the softwares. These devices sufficiently reproduce the sounds so that the purpose of the communication is fulfilled and the meaning is conveyed. For instance, if someone listens to the music, the sound quality must be such that it pleases the ears and the human brain and ear can easily comprehend the notes of the music being played and understand the lyrics therein. These loudspeaker speakers range from the ordinary woofers and subwoofers to the most exotic forms of tweeters and super tweeters. There are speakers available having different applications and features. There are devices that have different inner mechanisms and outward structures. There are many systems that offer mid range or high range drivers. In case of the multiple drivers, there is a filter network usually termed as the cross over that segregates the input signals into various categories and then directs them into the relevant driver or the transducer. Hence, there are n-ways speakers which have n different frequency bands. It should be kept in mind that the two way loudspeaker speakers comprise of a woofer and the tweeter and the three way sound system involve the tweeter, a woofer and the mid-range. A good sound system has the maximum efficiency that is the minimum reliance upon the input or the electrical power and the greater generation of the output in terms of sounds. A good sound system also maintains equilibrium between the acoustic signals and output. The sound system should have the capacity to absorb, diffuse and adjust to the other sounds present in the environmental setting or react as the case may be. For instance, there may be settings with the empty or hollow surroundings or there may be venues full of draperies, ceilings or reflectors. In such a situation ideal loudspeaker speakers need to efficiently absorb or diffuse the distracting factors. Similarly, the management of resonance and the distortion determine the quality of the speakers. The lower the level of the distortion, the higher would be the quality of the speakers. In a similar vein, the small and medium sized areas have a strong impact upon the placement and the performance of the sound system and vice versa. Due to the distance among the physical objects and the speakers resonance is excited or subdued. The location of the listener and his distance with the loudspeaker speakers also determine the reception of the acoustic signals and the balance of the frequencies that are being perceived. Thus, these are some of the several factors that explain the co-relation of the location, placement and the functioning of the sound system. An ideal system does the effective management of these factors, and provide the best sound output at the same time while maintaining and displaying higher levels of efficiency.

Avarice in Ben Jonsons Volpone Essay -- English Literature

What a rare punishment/Is avarice to itself! Volpone, Act 1, sc.iv. Do the events in the play confirm this? Volpone was written at a time when Jacobean London was infected with greed, cunning and credulity. These traits Ben Jonson used to show the folly of avarice and its rewards or punishment to those whose only love is money and appropriating more of it. Volpone is all about morals, greed and the depths people will sink to get what they want, despite its consequences on themselves and others. The Jacobean audiences were familiar with its setting in Venice and they thought Italy 'was the land of sensational evil-doing. Among Italian cities Venice ... stood in the front rank for this sinister repute.' (Barish, 1972: 65) So the choice of setting was deliberate, he wanted t...

Analysis of the film “We Need To Talk About Kevin”

â€Å"We Need to Talk About Kevin† is a movie adaptation of Lionel Shriver’s novel with the same title. The story revolves around a family of four, but the main focus is on the relationship between the mother (Eva, played by Tilda Swinton) and the son (Kevin, played by Rock River, Jasper Newell and Ezra Miller). The movie goes back and forth in time to show different points in Eva’s life. The use of flashbacks and the clever combination of the ‘past’ and ‘present’ scenes illustrates the contrast of what her life was like with her family and without, certain details in both let us know what Eva was thinking and feeling. There is a great significance to details in this film. For example the use of the colour red, this could represent fear, blood and the tense relationships Eva had not only with Kevin but also Franklin, her husband. At the beginning of the movie we see people in a pool of red, this makes us think of violence, a massacre, but really it’s just a tomato festival filmed from a distance. This scene seems strange and out of place, but it sets a certain mood and is also a way of introducing Eva’s occupation. Eva is a well-paid travel guide author, she is absoloutly in love with her job and gets to travel around the world. Her husband and her are passionatly inlove with one another, however Franklin prefers her at home. Franklin wants a child and after some time, once Eva is pregnant it is quite clear that she isn’t thrilled about this, however details such as little ballerinas running around suggest she wishes for a girl. Also you can read Analysis July at the Multiplex She eventually gives birth to Kevin, and we can tell from the very beginning that something isn’t right when he cries all the time except when he’s with his father Franklin. The movie lets us follow through the growing up of Kevin, the way he manipulates with his family and uses genius and cruel ways to get what he wants. As a baby he clearly prefers Franklin, but he’s always working while Eva stays at home with Kevin. This makes Eva exhausted and it doesn’t get much better with time. As a toddler, Kevin continues to be disobediant. He doesn’t communicate with Eva or respond to any of her actions, so she takes him to the doctor thinking he has autism. The doctor confirms that there isn’t anything wrong with him medically, which seems to break Eva’s heart as this means that to Kevin there is something wrong with her. She admits she was much happier before, but she never gives up on Kevin. She possibly sees Kevin as a challange that she can later add to her accomplishments or maybe she realizes it’s her duty to always be there for him, no matter what. Kevin is a very troubled and difficult character, from an early age he seems to do everything he can to make Eva miserable and he takes pleasure from this. He starts playing violent videogames and as a teenager he collects computer viruses. He continues to use nappies until about the age of 6 and once Eva gives birth to her second child Celia, the first thing Kevin does is splash some water in her eyes. However, there are some scenes which let us know that despite Kevin’s ‘cool’ act he is interested in his mum, that instead of his usual ‘whatever’ to everything, he does have prferences, and that he isn’t emotionless and behind the ‘mask’ he could be a normal boy. Kevin has a way of making sure everyone does what he wants. He blackmails Eva, pretends to be a sweet little boy infront of Franklin and uses the fact that Celia adores him to order her around and express his violent ways on her, knowing she’ll never betray him. Kev in seems to live only for his mother, he doesn’t really care about Franklin and Celia, they’re just his tools, the end of the movie proves this point. The peek of the story, as well as the borderline between ‘past’ and ‘present’ is a massacre carried out by Kevin, where he kills a number of people. He plans this for some time and commits the crime just before his 16th birthday. This is his grand finale of making Eva’s life a living hell, knowing that this time it’s permanent. He is very succesful in doing this as not only does the whole town now hate her but she hates herself too, blaming herself for what Kevin’s done. She punishes herself with a boring new job, tiny house and the memories. After the massacre she pays visits to Kevin in the juvenile prison, he continues to annoy her at every chance he gets until a few days before his 18th birthday (also the 2 year anniversary of the massacre) he finally seems to have realized that this wasn’t just a joke. Read also  Case 302 July in Multiplex The end of the movie is open to interpretation. To me it shows Eva ready to move on with life and accept her son the way he is. I don’t think she forgave him or ever will, but she possibly realized that having him as a reminder of everything is punishment enough and there is no reason not to continue living. I liked the movie, I thought the acting was incredible and the choice of actors, especially for Kevin was great too, he looked like the same person throughout all the stages of his life. I think the viewers have a lot to think about as the story unfolds, I like that there was no definite answer to anything, just like in everyday life, we have to try and understand things ourselves.

My First Day at A University of Khon Kaen Essay Example

My First Day at A University of Khon Kaen Essay Example My First Day at A University of Khon Kaen Essay My First Day at A University of Khon Kaen Essay My First Day at A University of Khan Keen Have you ever been so excited that your heart cant stop beaten? Thats show I was on my my first day at the Khan Keen University. I was very excited, but also was frightened. I was about to meet people who were going to be with me for four years. I kept asking myself; would they be nice? That morning woke up very early but arrived at the faculty late because I dont know the schedule of the transport in the university; my body was petrified. I could not even breath, I thought l was bad the first impression but the cheer whom I studied the first class didnt come too. How lucky I am! It was me and a new world. A new group Of people with different points Of view, different lifestyles. Somehow the air was different because the smell was different from the common. The distance was another important point. All these points made me realize one thing. Im in a new world. Firstly, I had never been in the North East of Thailand. Dont know what about this part before, until come to here, Khan Keen University, the biggest university in the north east of Thailand. The environment was completely different from the one that used to live. I come from Bangkok, but on the weekend I mostly stay in Phrase province, a small town in the north of Thailand. This is the first difference for me. The lifestyle of the north and the north east is seemed to close but not. Another important aspect is the lifestyle that they have here. They eat everything especially meat, but I dont eat meat. All these aspect show me that its a different place. I dont know how, but the environment was completely different from the one that I used to stay. Somehow the air was different because it smells different from the one. Here we find a lot of trees and flowers that give a more rural aspect to the university, and the days here look longer than the common no matter how the weather is. The environment looks completely from other places. Secondly, came to a new university alone, no old friends like others. Was left in between those new people who hardly knew themselves and were looking forward in meeting a new friend. Like them, I was also seeking to meet someone who could help me in my troubles and to whom I can call as my friend. Then knew once I started talking to a friend, other people would also come to talk with me as they are also in search of a friend with whom they can talk and tell them about there a previous school and those moments that they have shared with their old friends and who were also seeking for a new friends. Then enough they will be caught in a vicious circle called friendship from which to come out is impossible. Something happened to me when I joined my new university. Other students around me were so new looking that newness in the circle brought me a creepy sanction of me being lone in the middle of this new world. Thirdly, the distance was another important point. I had never had to use a motorcycle to get to my university. I cant ride a motorcycle so that it made my life difficult. My faculty, Humanities and Social sciences, is near my dormitory, so I could us a Shuttle Bus, a university service transport to get to my faculty. Finally, I understood that Im in a rural area, and Im not in an urban as used to be. But living in a big place like this university without owning transport made me spend my life very difficult. All in all, the first day of a new university was good. Enjoyed most of my teacher, classmate, and classes. So this was my first day at a university which was filled with fear, remembrance, and strangeness which later became a golden moment, the moment I could enjoy later on. The moment are written with unarguable ink to my memories was one of the most important moments in my life. It was the moment of truth. It was me and a new world. It was a new group of people with different points of view and different lifestyle. All these aspects show me that its a new world.

6 Tips for More Efficient Reading in Grad School

6 Tips for More Efficient Reading in Grad School Got a long reading list? Welcome to graduate school! Expect to read multiple articles and, depending on your field, even a book each week. While nothing will make that lengthy reading list go away, you can learn how to read more efficiently and get more out of your reading for less time. Here are 6 tips that many students (and faculty) often overlook. Scholarly reading requires a different approach than leisure reading The biggest mistake that students make is approaching their school assignments as if they were leisure reading. Instead, academic reading requires more work. Read prepared to take notes, reread paragraphs, or look up related material. Its not simply a matter of kicking back and reading. Read in multiple passes Sounds counter-intuitive, but the efficient reading of academic articles and texts requires multiple passes. Dont start at the beginning and finish at the end. Instead, scan the document multiple times. Take a piecemeal approach wherein you skim for the big picture and fill in the details with each pass. Start small, with the abstract Begin reading an article by reviewing the abstract and then the first couple of paragraphs. Scan the headings and read the last couple of paragraphs. You might find that there is no need to read further as the article may not suit your needs. Read in more depth If you deem that the material is necessary for your project, reread it. If an article, read the introduction (especially the end where the purpose and hypotheses are outlined) and conclusion sections to determine what the authors believe they studied and learned. Then look at the method sections to determine how they addressed their question. Then the results section to examine how they analyzed their data. Finally, reexamine the discussion section to learn about how they interpret their results, especially within the context of the discipline. Remember that you don't have to finish Youre not committed to reading the entire article. You can stop reading at any time if you decide that the article isnt important - or if you think you have all the information that you need. Sometimes a detailed skim is all that you need. Adopt a problem-solving mindset Approach an article as you would a jigsaw puzzle, working from the edges, the outside, in. Locate the corner pieces that establish the overall framework for the article, then fill in the details, the centerpieces. Remember that sometimes you wont need those inside pieces to grasp the material. This approach will save you time and help you get the most from your reading in the least amount of time. This approach also applies to reading scholarly books. Examine the beginning and end, then headings and chapters, then, if needed, the text itself. Once you step away from the one reading one-pass mindset youll find that scholarly reading is not as hard as it looks. Consider each reading strategically and decide how much you need to know about it and stop once youve reached that point. Your professors may not agree with this approach, but it can make your work much more manageable as long as you review some articles in detail.

Violence among Nursing Assignment Example | Topics and Well Written Essays - 1000 words

Violence among Nursing - Assignment Example 1. Using Inductive Analysis, look at all of your data and begin to organize it into groups. Inductive analysis entails discovering patterns, themes, and categories of data (Johnson, 2005). This survey captures a sample size of 239 nurses. Group 1 Gender 20-30 31-40 41-50 51-60 >60 Totals % # Surveys Female 28 21 17 33 6 105 43.9% 239 Male 0 0 0 0 0 0       # Years RN                         36 0 0 0 2 4 6 5.7%    # Yrs @ current facility                      36 0 0 0 1 1 2 1.9%    no answer 0 0 1 0 0 1 1.0%    Group 2. ... 16 11 28 6 83 79.0% Divisiveness 21 16 14 24 6 81 77.1% Lack of cohesiveness 20 14 13 24 5 76 72.4% Silent treatment 24 19 13 27 6 89 84.8% None of the above 0 0 0 1 0 1 1.0% Group 3 Victims of Horizontal Violence Female Nurses Age Bracket 20-30 31-40 41-50 51-60 >60 Total percentage    Yes 21 15 8 22 3 69 65.7% No 7 6 9 10 3 35 33.3% no answer 0 0 0 1 0 1 1.0% The first group of data captures the number of female nurses who have been into the nursing profession and the current health facility in which they are working. The age bracket of the nurses ranges from twenty to sixty years and above. The number of years in the nursing profession captured in this first group varies from less than two years to more than thirty-six years. The total number of nurses interviewed in this survey amount to 239. The second group of the survey data comprises of different forms of violence against nurses. These varieties of abuses range from minor to dangerous ones. The minor categories of abuse inc lude gossiping, non-verbal innuendos, and sarcastic comments while the dangerous ones comprise backstabbing. The third group of the data looks at incidences of victims in the nursing profession. The data captures female nurses of age bracket of twenty and above sixty years. Describe patterns and themes that converge from three different data sources The data in second group presents a number of recurring forms of Violence among nurses in different age brackets. Some of the recurring forms of abuse comprise of withholding information, belittling gestures, abuse of legitimate authority, silent treatment, and nonverbal innuendos. The data in table two report a pattern of violence that is similar in the age brackets of 20-30 and 51-60 years. These two groups have the highest cases of violence

Using the product or service of your choice describe the behaviors in Assignment

Using the product or service of your choice describe the behaviors in making a purchase - Assignment Example Chaudhuri (2006) noted that consumer behaviour is influenced by both internal and external factors. The internal factors include personality, lifestyle, motivation, demographics, attitudes, feelings, beliefs, knowledge etc. The external factors include: ethnicity, family, advice, locality, culture, social class etc. The motive of the purchaser or consumer is one of the important factors influencing the purchase of a car. According to Evans, Foxal and Jamal (2009), motive is the driving force that makes an individual want to obtain a certain product. In this case, the purchase of a car will depend entirely on the needs of the purchaser. A consumer may have certain needs that make it necessary to purchase a car instead of purchasing a motor bike for instance. This needs underpin the processes involved in deciding to buy a car. Again the social status and financial capability of a purchaser also influences the decision to purchase. A buyer with good financial capability will purchase a car based on his social standing in the society and the impression he or she wants to make. Such a buyer not only needs a car, but the car has to conform to certain desired standards. These factors go hand in hand with the lifestyle of the purchaser of the car. According to Graves (2010), the purchaser’s attitude towards a certain type of car in combination to his or her knowledge and ability play a central role in determining whether a purchaser of a car will purchase a certain car. The knowledge of a purchaser of a car with regards to strengths and weaknesses of the car shape his attitude towards the car and this in combination with his financial ability then determine which type of car will be bought. Social factors also influence the purchaser’s choice of a product. According to Underhill (2008), social factors like family, friends and the greater society influence a purchaser’s choice. A buyer will buy a car that meets the criterion that in